NTP Configuration

The right time synchronization is very important while troubleshooting different kind of problems. Most network components have the option to synchronize their time with a time server on the internal network or the internet. This post shows how to configure NTP with the right time zone on Cisco and HP ProCurve components. The example configurations use the NTP servers from pool.ntp.org.

Cisco

clock timezone MET 1
clock summer-time MEST recurring last Sun Mar 2:00 last Sun Oct 3:00
!
ntp server 141.40.103.102
ntp server 213.239.211.122

HP ProCurve

time timezone 60
time daylight-time-rule Western-Europe
sntp server 141.40.103.102
sntp server 213.239.211.122
timesync sntp
sntp unicast
sntp 720

The following two tabs change content below.

• Bio
• Latest Posts

René Jorissen

Co-owner and Solution Specialist at 4IP Solutions

René Jorissen works as Solution Specialist for 4IP in the Netherlands. Network Infrastructures are the primary focus. René works with equipment of multiple vendors, like Cisco, Aruba Networks, FortiNet, HP Networking, Juniper Networks, RSA SecurID, AeroHive, Microsoft and many more. René is Aruba Mobility First Expert (AMFX #26), Aruba Certified Mobility Expert (ACMX #438), Aruba Certified ClearPass Expert (ACCX #725), Aruba Certified Design Expert (ACDX #760), CCNP R&S, FCNSP and Certified Ethical Hacker (CEF) certified. You can follow René on Twitter and LinkedIn.

Latest posts by René Jorissen (see all)

• User tunnel not operational - January 17, 2020
• AOS – WireShark: remote capture - October 25, 2019
• Migrate RAP from AOS 6.x to AOS 8.x - May 15, 2019